MikroTik Certified User Management Engineer Certification (MTCUME)
The Mikrotik Training Academy offers interested parties from all over the world the opportunity to gain experience and to find out more about MikroTik products and technologies. The MikroTik training program consists of courses that are held worldwide by official MikroTik certified trainers. Participation in these courses therefore also offers the opportunity to receive professional certification in various MikroTik product technologies.
The MikroTik Certified User Management Engineer (MTCUME) course is aimed at administrators, network engineers and network technicians who want to set up or convert and manage large company networks or client CPE integration.
Part of the course are practical exercises with a training kit so that you can apply the knowledge you have acquired straight away. The exam to be passed is a central online test specified by MikroTik. If you pass the exam, you will receive an official certificate from MikroTik.
After completing the course, you will be familiar with the handling of large RouterOS-based networks with centralized user administration.
Language: This course is multilingual and is held in German and English.
Kursinhalt
Module 1 - PPP
- PPP Profile
- Local and remote addresses
- Incoming and outgoing filters
- Address list
- Change TCP-MSS
- Use encryption
- Session timeout
- Rate-limit configuration
- Only-one setting
- PPP Secret
- Service and Profile
- Local and Remote address
- Routes configuration
- Limit Bytes In/Limit Bytes Out configuration
- IP Pool
- Set addresses ranges
- Next pool options
- Module 1 laboratory
Module 2 - PPTP, LT2P
- PPTP and L2TP
- Theory
- Comparison
- PPTP Client configuration
- Client setup
- Set profile
- Dial on demand
- Add default route and static routes
- PPTP Server configuration
- Enable server
- Setup profiles
- Add clients to PPP secret
- Set static interfaces for clients
- L2TP Client configuration
- Client setup
- Configure profile
- Dial on demand
- Add default route and static routes
- L2TP Server configuration
- Enable server
- Set profiles
- Add clients to PPP secret
- Set Static interfaces for clients
- Module 2 laboratory
Module 3 - PPPoE
- PPPoE server and client
- Theory
- Usage environment
- Comparison to other PPP protocols
- PPPoE client configuration
- Client setup
- Select interface
- Service name
- Configure profile
- PPPoE Server configuration
- Enable PPPoE server
- Set profiles
- Add clients to PPP secret
- Add Static interfaces for clients
- Secure server by removing any IP address from PPPoE server
interface
- Encryption
- Set profile without encryption
- Set profile with encryption
- Configure PPPoE client without encryption
- Interface ECMP
- Set ECMP routes for PPP interfaces
- Module 3 laboratory
Module 4 - Bridging
- L2TP and EoIP
- Set L2TP tunnel
- Set EoIP tunnel
- Create bridge and add necessary interfaces to ports
- Confirm you have Ethernet connectivity between remote
nodes
- L2TP and VPLS
- Set L2TP tunnel
- Set VPLS tunnel
- Create bridge and add necessary interfaces to ports
- L2TP and BCP
- Set L2TP tunnel
- Use BCP to bridge PPP interface
- Add to bridge necessary interface
- Multilink Protocol
- Enable multilink by specifying correct MRRU settings
- Disable mangle rules for MSS adjustment
- MLPPP (optional)
- Setup client and specify multiple interfaces for one client
- Set PPPoE server with MLPPP support
- Module 4 laboratory
Module 5 - IPSec
- Introduction
- Theory and concepts
- Comparison to other VPN protocols
- IPSec Peer
- Use different authentication methods
- IPSec exchange modes
- Encryption and hash algorithms
- NAT traversal
- Lifetime and lifebytes
- DPD protocol
- Policy
- IPSec protocol and action
- Tunnels
- Generate dynamic Policy
- Proposal
- Encryption and authentication algorithms
- Lifetime
- PFS
- Installed-SA
- Flush SA
- Create IPSec between two routers with NAT
- Set peer
- Set policy
- Set NAT rules
- Confirm the secure link is established
- Module 5 laboratory
Module 6 - HotSpot
- Introduction
- Concepts
- Usage environments
- Setup HotSpot with default settings
- HotSpot Login Methods
- HTTP CHAP/PAP
- MAC
- Cookie
- HTTPS
- Trial
- RADIUS
- Users
- Add users
- Set MAC-address for user
- Set MAC-address for username
- Limit Uptime and Limit Bytes In/Out
- Reset limits for user
- Monitor Users
- Host Table
- Active Table
- SNMP for users
- Profiles
- Keepalive timeout
- Shared users
- Rate limit
- Address-list
- Incoming/Outgoing filter
- Incoming/Outgoing Packet Mark
- Bypass HotSpot
- Walled garden
- Walled garden IP
- IP binding
- Customize HotSpot
- Advertisement
- Customize pages
- Module 6 laboratory
Module 7 - RADIUS
- RADIUS client
- Add radius client
- Set service
- Use RADIUS for the specific service
- RADIUS server
- User manager
- Install the latest user-manager
- Add routers
- Add users
- Set profile
- RADIUS incoming
- Module 7 laboratory
- * Preisangaben: zzgl. der gesetzlichen Mehrwertsteuer
- Voraussetzungen für Teilnahme: MTCNA
- Weitere enthalten Leistungen:
Tagungs-/Schulungsunterlagen, Mittagessen, Pausenerfrischungen
- zusätzliche Information:
Hotelbuchungen sind separat zu tätigen. Die Kursunterlagen sowie der Online-Multiple-Choice-Test sind in Englisch.
Hourly Schedule
Day 1 - Day 3
- 9 clock - 17 o'clock
- Module 1 - PPP
- (For details see course content)
- 9 clock - 17 o'clock
- Module 2 - PPTP, LT2P
- (For details see course content)
- 9 clock - 17 o'clock
- Module 3 - PPPoE
- (For details see course content)
- 9 clock - 17 o'clock
- Module 4 - Bridging
- (For details see course content)
- 9 clock - 17 o'clock
- Module 5 - IPSec
- (For details see course content)
- 9 clock - 17 o'clock
- Module 6 - HotSpot
- (For details see course content)
- 9 clock - 17 o'clock
- Module 7 - RADIUS
- (For details see course content)