MikroTik Certified Enterprise Wireless Engineer Certification (MTCEWE)
The Mikrotik Training Academy offers interested parties from all over the world the opportunity to gain experience and to find out more about MikroTik products and technologies. The MikroTik training program consists of courses that are held worldwide by official MikroTik certified trainers. Participation in these courses therefore also offers the opportunity to receive professional certification in various MikroTik product technologies.
The Certified Enterprise Wireless Engineer (MTCEWE) course involves learning about CAPsMAN and MikroTik’s 60GHz technology. Part of the course are practical exercises with a training kit so that you can apply the knowledge you have acquired straight away. The exam to be passed is a central online test specified by MikroTik.
After passing the exam, you will receive a certificate. At the end of this course you will understand the most important Entersprise WLAN functions of RouterOS, know how WiFi works and be able to implement CAPsMAN in real WiFi installations.
The target group are network technicians who need to use the following and want to provide support:
- Enterprise WiFi networks based on MikroTik Controlled Access Point System Manager (CAPsMAN)
- Simple wireless Layer 2 bridges with MikroTik 60GHz wireless wire technology
Language : This course is multilingual and is held in German and English.
Kursinhalt
Module 1: Wireless Introduction
- Wireless routers
- RouterBOARD hardware with integrated wire
- MikroTik wireless cards
- Module 1 laboratory
Module 2: RF Wireless Characteristics
- The RF Radio Spectrum and Electromagnetic Energy
- Decibels
- Decibels
- Antenna theory and examples of use
- Isotropic
- Directional
- Omnidirectional
- Antenna polarization
- Initial class setup
- Attenuation/absorption and reflective properties of building materials and how they affect radio signals
- 2.4/5GHz indoor/outdoor cell sizes and transmitter powers
- Client roaming
- RouterOS station roaming setting
- Co-channel and Adjacent-channel interference
- Choosing correct access point placement
- Physical network infrastructure
- Understanding ‘Airtime
- Module 2 laboratory
Module 3: Wireless Standards
- 802.11a/b/g/n/ac wireless protocol
- 802.11 standards features overvie
- Bands, channels (frequencies) and channel widths
- Scan list
- Modulation schemes and MCS data rates
- Channel bonding
- Frame aggregation overview
- Chains (SISO, MIMO and MU-MIMO)
- CSMA/CA overview
- HW protection (RTS/CTS)
- QoS priorities / WMM®
- Future standards (802.11ax)
- Module 3 laboratory
Module 4: Country / Regulatory Domain Settings in CAPsMAN
- Antenna gain and control of maximum EIRP
- Selecting the country code and purpose of ‘installation’ setting
- Dynamic frequency selection (DFS radar detect)
- Module 4 laboratory
Module 5: Non CAPsMAN Wireless Modes
- Extending coverage with repeaters and extenders
- Bridging with MikroTik 60GHz Wireless Wire products
- Module 5 laboratory
Module 6: Wireless Security
- Authentication (Open / Shared)
- Encryption (WEP, WPA™ TKIP, WPA2™ AES)
- Weaknesses of older encryption (WEP / WPA™ TKIP)
- Overview of 802.11X (RADIUS and EAP)
- Performance difference of TKIP vs. AES
- Basic access list (ACL) management
- Mitigating against most common known vulnerabilities of 802.11
- Module 6 laboratory
Module 7: Wireless Troubleshooting
- Troubleshooting wireless clients
- Registration table analysis
- TX/RX signal strength
- Signal to noise ratio
- CCQ, frames and HW frames, hardware retries
- Data rates
- Analyzing the System log for wireless problems
- Scan, background scan
- Frequency usage
- Wireless snooper
- Wireless sniffer
- Module 7 laboratory
Module 8: Wireless Surveys
- Pre-install site surveys
- Spectrum analysis overview
- Prediction software overview
- Post-installation validation surveys
- Module 8 laboratory
Module 9: CAPsMAN v2
- MikroTik CAPsMAN version 2 features
- CAP hardware/software requirements
- L2 (broadcast/multicast) vs L3 (via UDP) CAPs communication methods
- Using DHCP option 138
- Configuration of a CAP
- CAPsMAN discovery and selection by CAP
- Authentication and locking by SSL certificates
- Auto certificate & locking
- Auto upgrading feature
- Securing the CAP configuration
- CAPsMAN configuration settings (channels, datapaths, security configurations, data rates)
- Provisioning CAP Interfaces (single and dual band APs)
- Datapath / local forwarding
- Dynamic vs static CAP interfaces on CAPsMAN
- Virtual AP (additional SSIDs)
- Static interfaces on CAPs (slave virtual interfaces with VLANs)
- Access list features
- Module 9 laboratory
- * Preisangaben: zzgl. der gesetzlichen Mehrwertsteuer
- Voraussetzungen für Teilnahme: MTCNA
- Weitere enthalten Leistungen:
Tagungs-/Schulungsunterlagen, Mittagessen, Pausenerfrischungen
- zusätzliche Information:
Hotelbuchungen sind separat zu tätigen. Die Kursunterlagen sowie der Online-Multiple-Choice-Test sind in Englisch.
Hourly Schedule
Day 1 - Day 3
- 9 clock - 17 o'clock
- Module 1: Wireless Introduction
- (For details see course content)
- 9 clock - 17 o'clock
- Module 2: RF Wireless Characteristics
- (For details see course content)
- 9 clock - 17 o'clock
- Module 3: Wireless Standards
- (For details see course content)
- 9 clock - 17 o'clock
- Module 4: Country / Regulatory Domain Settings in CAPsMAN
- (For details see course content)
- 9 clock - 17 o'clock
- Module 5: Non CAPsMAN Wireless Modes
- (For details see course content)
- 9 clock - 17 o'clock
- Module 6: Wireless Security
- (For details see course content)
- 9 clock - 17 o'clock
- Module 7: Wireless Troubleshooting
- (For details see course content)
- 9 clock - 17 o'clock
- Module 8: Wireless Surveys
- (For details see course content)
- 9 clock - 17 o'clock
- Module 9: CAPsMAN v2
- (For details see course content)
